No Products in the Cart
1. Strong ultrasonic signal to scare animals. In the area of the animal's unpleasant ultrasonic sound, the animal is scared. When the animal enters the range the sound is activated. Therefore, animals can't get used to the sound, and the repulsion force is stronger.
2, strong flash to repel the fear of light animals. When the animal enters the range, the animal will be scared. Button "SENS" (left): Adjusts the sensitivity and distance. By turning the knob clockwise, you increase the range of protection. Repel the small animal and turn the knob to the right.
☆ Power: solar panels and 3 x AA batteries
☆ Effective distance: up to 8M (depending on weather and environment)
☆ Detection angle: 110° level (visual weather around)
☆ Waterproof rating: IPX4.
☆ It uses the principle of infrared detection to emit small waves while driving small animals to drive small animals. It protects your property, your garden and your courtyard from harassment by nasty stray dogs, stray cats and other small animals. ☆ Because it is a portable design product, it can be installed in your home, garden, or any place in the courtyard. This product can be used with low-voltage power supply. This product is just to drive animals without any chemicals. It only emits 25kHz. The ultrasound frequency drives them away. It will not cause any harm to the human body.
☆1) Speaker: This product can emit high frequency to drive away animals.
☆2) PIR motion detector: This is an infrared sensor that continuously outputs signals. When it senses that a moving animal is in the detection range, it will automatically emit sound waves to drive the animals and the LEDs will light up. .
510B product introduction:
Solar repeller drive dog principle description:
1. When the animal enters the coverage of the device, the device is activated and emits a strong ultrasonic signal. The ultrasound can cause the animal to hear or fear fear, or irritability, or nervousness and other unpleasant sounds of animals, driving the animals out of the area. Ultrasonic frequency: 25 kHz - 61 kHz cyclic sweep. Here are some of the ultrasonic frequency ranges that animals can hear:
Animal species hearing range (Hz)
Field mouse 20-76K
House mouse 100-91K
2. There is a 2.5 second sound wave alarm when the device is turned on, and the sound wave frequency is 5KHz, which makes it easy for people to distinguish whether the device works or not, and the device is good or bad (ultrasonic part).
3, strong flash to repel the fear of light animals. There are many animals that are afraid of strong flashing lights (usually white or red). When animals enter the coverage of the equipment, the flashing of white light with ultrasound will increase the chances of success.
☆ Power: 5.5V, 0.11W amorphous silicon solar panel
☆Battery: 4×2/3AA 300mAh battery
☆Battery material: Ni-MH charging once every 6~8 hours
☆ Effective distance: 6-8M (depending on weather and environment) ☆ Detection angle: 110° level (visual weather around)
☆ Waterproof rating: IPX4.
1. It uses infrared detection principle, the infrared LED indicator lights up, the speaker works at 5 kHz for 2.5 seconds, then starts to output ultrasonic waves, while the white LED lights flash; when small animals are detected, ultrasonic waves are emitted to drive out small animals. It protects your property, your garden and your courtyard from harassment by nasty stray dogs, stray cats and other small animals. 2. Because it is a portable design product, it can be installed anywhere in your home, garden, or courtyard. This product uses solar concentrators and rechargeable batteries, using renewable, clean energy – solar energy, which saves energy and protects the environment.
3. This product is only to drive animals without any harmful chemicals. It only emits 25kHz-61kHz frequency ultrasonic waves to drive them away. It will not harm the human body, harm animals, and protect animal species. .
Description of each functional part of the product:
1) Speaker: This product can emit high frequency ultrasonic waves to drive away animals.
2) PIR motion detector: This is a pyroelectric infrared sensor. When a moving animal is in the detection range, it will detect it, and at the same time give the processor a signal to let the device start working, emitting sound waves to drive the animal and white. The LED indicator also flashes.
3) Red LED indicator: The red LED of the animal is illuminated to indicate the working status of the device.
4) White LED flash: Induction of the animal, the white LED flashing light starts to work, each time flashes 3 times, the flashing interval is 1.5 seconds, and the cycle continues until the animal leaves the protected area for 15 seconds, the device stops working and enters standby. .
5) Strong flash white LED is better for some animals such as birds, mice and cats.
6) Ultrasonic frequency conversion: The frequency bands of ultrasonic frequency conversion are: 25 kHz, 34 kHz, 43 kHz, 52 kHz, 61 kHz, each band operates for 2.5 seconds, and so on.
510B is an upgraded version of 510, The product has a flashing function [the same appearance]